LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> XTS Livery >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front Fender Replacement >> Removal Procedure

Removal Procedure

  1. GM4783422

    Front Compartment Front Sight Shield (3) - Remove - Front Compartment Front Sight Shield Replacement 

  2. GM4783149

    Front Compartment Side Sight Shield (2) - Remove - Front Compartment Side Sight Shield Replacement 

  3. GM4784305

    Air Inlet Grille Panel (1) - Remove - Air Inlet Grille Panel Replacement

  4. GM4784652

    Rocker Panel Molding (1) - Remove - Rocker Panel Molding Replacement

  5. GM4784340

    Remove both front wheelhouse liners (1). Front Wheelhouse Front Liner Replacement

  6. GM4784343

    Front Bumper Fascia (1) - Remove - Front Bumper Fascia Replacement

  7. GM4784653

    Front Fender Upper Rear Molding (1) - Remove - Front Fender Upper Rear Molding Replacement

  8. GM4784654

    Headlamp Bolt (1) - Remove

  9. Front Fender Nut (2) - Remove
  10. Front Fender Bolt (3) - Remove [3x]
  11. GM4784656
    NOTE:

    Place protective covering over windshield at top rear bolt (1) to prevent windshield breakage

    Front Fender Bolt (1) Remove

  12. Front Fender Bolt (2) Remove [2x]
  13. Headlamp Bolt (3) - Remove
  14. Front Fender (4) - Remove
scientia non olet · About LEMON Manuals