Valve Rocker Arm Cover Installation - Left Side

Fig 1: Valve Rocker Arm Cover - Left Side

Courtesy of GENERAL MOTORS COMPANY

Valve Rocker Arm Cover Assemble - Left Side

Callout	Component Name
1	Ignition Coil
2	Ignition Coil Bolt CAUTION: Refer to Fastener Caution . Tighten  10 N.m (89 lb in)

Fig 2: Valve Rocker Arm Cover - Left Side (With Tightening Sequence)

Courtesy of GENERAL MOTORS COMPANY

Valve Rocker Arm Cover Installation - Left Side

Callout	Component Name
1	Valve Rocker Arm Cover Gasket NOTE: Must use a NEW gasket.
2	Valve Rocker Arm Cover - Left Side
3	Valve Rocker Arm Cover Bolt CAUTION: Refer to Fastener Caution . Procedure  Tighten the valve rocker arm cover bolts in the sequence shown. Tighten  10 N.m (89 lb in)