LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade ESV Platinum, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 5.3L (L83) Or 6.2L (L86) - Repair Instructions - Off Vehicle >> Repair Instructions - Off Vehicle >> Intake Manifold Cleaning And Inspection >> Cleaning Procedure

Cleaning Procedure

    Fig 1: Intake Manifold-To-Cylinder Head Gaskets
    GM2889928Courtesy of GENERAL MOTORS COMPANY
  1. Remove and discard the intake manifold-to-cylinder head gaskets (1).
    2. Fig 2: Manifold Absolute Pressure (MAP) Sensor Bolt, MAP sensor and Seal
    GM2889926Courtesy of GENERAL MOTORS COMPANY
  2. Remove the manifold absolute pressure (MAP) sensor bolt (1), MAP sensor (2), and seal (3).
  3. Remove the evaporative emission (EVAP) canister purge solenoid valve bolt (5), EVAP canister purge solenoid valve (6), and seal (7).
  4. Clean the intake manifold in solvent.
    5. WARNING:

    Refer to Safety Glasses and Compressed Air Warning .

  5. Dry the intake manifold with compressed air.
scientia non olet · About LEMON Manuals