Engine Coolant Manifold Installation
| Callout | Component Name |
|---|---|
| 1 | Engine Coolant Manifold Gaskets
NOTE:
Must use a NEW gasket. |
| 2 | Engine Coolant Manifold Assembly |
| 3 | Engine Coolant Manifold Bolt
CAUTION:
Refer to Fastener Caution .
NOTE:
Clean the threads and apply a threadlocker. Refer to Adhesives, Fluids, Lubricants, and Sealers . Procedure Tighten the engine coolant manifold bolts in the sequence shown. Tighten 25 N.m (18 lb ft) |
| 4 | Engine Coolant Manifold Bolt
NOTE:
Clean the threads and apply a threadlocker. Refer to Adhesives, Fluids, Lubricants, and Sealers . Procedure Tighten the engine coolant manifold bolts in the sequence shown. Tighten 25 N.m (18 lb ft) |
| 5 | Engine Coolant Manifold Bolt
NOTE:
Clean the threads and apply a threadlocker. Refer to Adhesives, Fluids, Lubricants, and Sealers . Procedure Tighten the engine coolant manifold bolts in the sequence shown. Tighten 25 N.m (18 lb ft) |
| 6 | Engine Coolant Manifold Bolt
NOTE:
Clean the threads and apply a threadlocker. Refer to Adhesives, Fluids, Lubricants, and Sealers . Procedure Tighten the engine coolant manifold in the sequence shown. Tighten 25 N.m (18 lb ft) |
| 7 | Drive Belt Tensioner |
| 8 | Drive Belt Tensioner Bolt Tighten 58 N.m (43 lb ft) |