Turn Signal Switch Replacement (N38)

Fig 1: Turn Signal Switch (N38)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Steering Wheel Replacement (Chevrolet/GMC) Steering Wheel Replacement (Cadillac) Steering Column Shroud Replacement (RPO N38)
1	Turn Signal Switch Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Turn Signal Switch Procedure Disconnect the electrical connectors. Press in the pin on the front of the turn signal switch to avoid interference with the turn signal switch cancel cam position plate.

Callout

Component Name

Preliminary Procedures

Turn Signal Switch Bolt [2x]

CAUTION: Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Turn Signal Switch

Procedure

Disconnect the electrical connectors.
Press in the pin on the front of the turn signal switch to avoid interference with the turn signal switch cancel cam position plate.