LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Transfer Case - Mp 3010 (NP0)) >> Repair Instructions - Off Vehicle >> Transfer Case Disassemble >> Transfer Case Holding Fixture Installation

Transfer Case Holding Fixture Installation

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Transfer Case Holding Fixture
GM1849343Courtesy of GENERAL MOTORS COMPANY
Transfer Case Holding Fixture Installation

Callout Component Name
1 Transfer Case Nuts
Special Tools 
J-45759  Assembly Fixture
For equivalent regional tools, refer to Special Tools .
2 Transfer Case
Special Tools 
J-3289-20  Holding Fixture
3 Pivot Pin
NOTE:
  • Always secure with the pivot pin after rotating.
  • The transfer case can be rotated 360 degrees to facilitate repair.
scientia non olet · About LEMON Manuals