LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 5.3L (L83) Or 6.2L (L86) - Repair Instructions >> Repair Instructions >> Fuel Pressure Sensor Replacement (Fuel Pipe)

Fuel Pressure Sensor Replacement (Fuel Pipe)

Fig 1: Fuel Pressure Sensor (Fuel Pipe)
GM3637291Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
1 Fuel Pressure Sensor
CAUTION:

Refer to Component Fastener Tightening Caution .

Procedure

  1. Disconnect the electrical connector.
  2. Remove and discard the fuel pressure sensor O-ring seal.

Tighten 
15 N.m (11 lb ft)
scientia non olet · About LEMON Manuals