LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> CTS Base, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Driver or Passenger Seat Cushion Outer Finish Panel Replacement (With W2E)

Driver or Passenger Seat Cushion Outer Finish Panel Replacement (With W2E)

GM4044884Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Driver or Passenger Seat Removal and Installation 
  2. Front Seat Cushion Front Finish Cover Replacement 
1 Driver or Passenger Seat Cushion Outer Finish Cover Fastener (Qty: 2)
CAUTION:

Refer to Fastener Caution .
2 Driver or Passengert Seat Cushion Outer Finish Cover

Procedure

  1. Disengage the seat back cushion finish panel straps and pull back the toe kick cover to gain access to the rear fastener.
  2. Remove the outer finish panel by pulling upward near the retainer clip locations.
  3. Disconnect the electrical connectors.
  4. If replacing the finish panel, transfer components as necessary.
scientia non olet · About LEMON Manuals