Evaporative Emission Canister Purge Solenoid Valve Replacement (LFX)

Fig 1: Evaporative Emission Canister Purge Solenoid Valve

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LF3) . Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (LFX) .
1	Bolt CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Evaporative Emission Canister Purge Solenoid Valve Procedure Disconnect the EVAP canister purge solenoid harness connector. Install a NEW O-ring.

Callout

Component Name

Preliminary Procedure

Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LF3) .
Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (LFX) .

Bolt

CAUTION:

Tighten
10 N.m (89 lb in)

Evaporative Emission Canister Purge Solenoid Valve

Procedure