Removal Procedure
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
- Support the transmission with a suitable jack.
- Remove the wire harness retainer at the front transmission mount bracket.
Courtesy of GENERAL MOTORS COMPANY
- Remove the front transmission mount through bolt (1).
Courtesy of GENERAL MOTORS COMPANY
- Remove and DISCARD the three transmission mount-to-transmission attachment bolts (2).
- Remove the jack from under the transmission.
- Lower the vehicle.
- Remove the front compartment front sight shield. Front Compartment Front Sight Shield Replacement
- Remove the transmission mount (1) from the vehicle.