LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CTS V >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 6.2L (LT4) - Repair Instructions >> Repair Instructions >> Evaporative Emission Hose Replacement >> Removal Procedure

Removal Procedure

    WARNING:

    Refer to Safety Glasses Warning .

  1. Remove the evaporative emission canister purge tube. Evaporative Emission Canister Purge Tube Replacement 
  2. Fig 1: Evaporative Emission Hose And Retainers
    GM4084929Courtesy of GENERAL MOTORS COMPANY
  3. Remove the evaporative emission hose (1) from the retainers (2). Plastic Collar Quick Connect Fitting Service
  4. Raise and support the vehicle. Lifting and Jacking the Vehicle (CTS)Lifting and Jacking the Vehicle (CTS-V)
  5. Remove the underbody front air deflector right side. Underbody Front Air Deflector Replacement - Right Side
  6. Remove the front body exhaust heat shield right side. Front Body Exhaust Heat Shield Replacement (Right)Front Body Exhaust Heat Shield Replacement (Left)
  7. Remove the right side catalytic converter and exhaust. Exhaust System Replacement (LF3, LGX)
  8. Fig 2: Evaporative Emission Hose
    GM4084956Courtesy of GENERAL MOTORS COMPANY
  9. Disconnect the evaporative emission hose (1) and remove from retainers (2). Plastic Collar Quick Connect Fitting Service 
  10. Remove the evaporative emission hose (1) from the vehicle.