Front Side Door Window Belt Reveal Molding Replacement

Fig 1: Front Side Door Window Belt Reveal Molding

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the outside rearview mirror. Refer to Outside Rearview Mirror Replacement (North America)Outside Rearview Mirror Replacement (Except North America) .
1	Front Side Door Window Belt Reveal Molding Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Front Side Door Window Belt Reveal Molding Procedure Align the sealing strip to the door. Ensure that the end cap is flush to the door cutline. Rotate the sealing strip downward. Align the sealing strip to the door pinch-weld flange. Push the sealing strip downward to fully seat and secure the strip to the door. NOTE: Inspect the window for proper operation before installing the door trim.

Callout

Component Name

Front Side Door Window Belt Reveal Molding Screw (Qty: 2)

CAUTION:

Tighten
2.5 N.m (22 lb in)

Front Side Door Window Belt Reveal Molding

Procedure

NOTE:

Inspect the window for proper operation before installing the door trim.