Outside Rearview Mirror Replacement (North America)

Fig 1: Outside Rearview Mirror (North America)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front side door garnish molding. Refer to Front Side Door Window Garnish Molding Replacement .
1	Outside Rearview Mirror Nut (Qty: 3) CAUTION: Refer to Fastener Caution . Procedures Open the front side door to the full open position. Disconnect the electrical connector. NOTE: When replacing the outside rearview mirror, transfer the insulator pad to the new mirror assembly. Tighten 9 N.m (80 lb in)
2	Outside Rearview Mirror NOTE: Inspect the outside mirror for proper operation before installing the door trim.

Callout

Component Name

Preliminary Procedure
Remove the front side door garnish molding. Refer to Front Side Door Window Garnish Molding Replacement .

Outside Rearview Mirror Nut (Qty: 3)

CAUTION:

Procedures

NOTE:

When replacing the outside rearview mirror, transfer the insulator pad to the new mirror assembly.

Tighten
9 N.m (80 lb in)

Outside Rearview Mirror

NOTE:

Inspect the outside mirror for proper operation before installing the door trim.