LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2017 >> CTS Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 211 (Automatic Transmission - 8L45 (M5N) Or 8L90 (M5U) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Manual Shift Shaft Position Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the automatic transmission range selector lever. Refer to Automatic Transmission Range Selector Lever Replacement (M5U) .
  2. Remove the control valve body. Refer to Control Valve Body Replacement (M5U, M5T)  and Control Valve Body Replacement (M5N) .
  3. Remove and Discard the manual shift shaft detent lever hub pin (3).
    Fig 1: Manual Shift Shaft And Pins
    GM3817211Courtesy of GENERAL MOTORS COMPANY
  4. Remove and Discard the manual shift shaft pin (1).
  5. Remove the manual shift shaft (2).
  6. Remove or reposition the manual shift shaft position switch assembly as necessary.
  7. Disconnect the park pawl actuator rod (2) from the manual shift shaft position switch (1).
    Fig 2: Manual Shift Shaft Position Switch And Park Pawl Actuator Rod
    GM3817350Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals