Installation Procedure

WARNING: This page is about a different car, the 2016 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Connect the park pawl actuator rod (2) to the manual shift shaft position switch (1).

Fig 1: Manual Shift Shaft Position Switch And Park Pawl Actuator Rod
Courtesy of GENERAL MOTORS COMPANY
Install the manual shift shaft position switch assembly (1).
Install the manual shift shaft (2) aligning the position switch assembly onto the shaft.

Fig 2: Manual Shift Shaft And Pins
Courtesy of GENERAL MOTORS COMPANY
Install the NEW manual shift shaft pin (1).
Install the NEW manual shift shaft detent lever hub pin (3).
Install the control valve body. Refer to Control Valve Body Replacement (M5U, M5T) and Control Valve Body Replacement (M5N) .
Install the automatic transmission range selector lever. Refer to Automatic Transmission Range Selector Lever Replacement (M5U) .
Reprogram the transmission. Refer to Solenoid Valve Characterization Reprogramming