LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Performance, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Oil Pan Replacement >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Drain the engine oil and remove the oil filter. Refer to Engine Oil and Oil Filter Replacement (LF1, LFW or LFX) .
  3. Remove the catalytic converter. Refer to Catalytic Converter Replacement - Left Side (Front) .
  4. Remove the air conditioning (A/C) compressor bolts and reposition. DO NOT discharge the A/C system. Support the A/C compressor. Refer to Air Conditioning Compressor Replacement (LFX) .
  5. Remove the front cover. Refer to Engine Front Cover Replacement .
  6. Remove the oil pan to transmission bolts.
    7. Fig 1: Removing/Installing Oil Pan
    GM1831994Courtesy of GENERAL MOTORS COMPANY
  7. Remove the oil pan bolts.
  8. Remove the oil pan.
  9. Disassemble the oil pan. Refer to Oil Pan Disassemble .
  10. Clean the oil pan and the engine block gasket surface. Refer to Oil Pan Cleaning and Inspection .
scientia non olet · About LEMON Manuals