|
Preliminary Procedures
- Recover the refrigerant. Refer to Refrigerant Recovery and Recharging (Belt Driven Compressor) .
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
- Remove front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement
.
- Remove the drive belt from the compressor. Refer to Drive Belt Replacement
.
- Disconnect the A/C compressor electrical connector.
- Remove the air conditioning condenser and evaporator hose from the compressor. Refer to Air Conditioning Condenser and Evaporator Hose Replacement
|
| 1 |
A/C Compressor Bolt Tighten 58 N.m (43 lb ft) |
| 2 |
A/C Compressor Nut Tighten 22 N.m (12 lb ft) |
| 3 |
A/C Compressor Bolt Tighten 58 N.m (43 lb ft) |
| 4 |
A/C Compressor Procedure
- Remove and discard sealing washers. Refer to Air Conditioning System Seal Replacement .
- When replacing the A/C compressor, balance the compressor oil. Refer to Air Conditioning Compressor Oil Balancing .
|