LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2016 >> SRX Performance, AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 3.0L (LFW) Or 3.6L (LFX) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Engine Flywheel Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Engine Flywheel
    GM902811Courtesy of GENERAL MOTORS COMPANY
  1. Remove the transmission. Refer to Transmission Replacement (FWD)Transmission Replacement (AWD) .
  2. Remove the automatic transmission flex plate. Refer to Automatic Transmission Flex Plate Removal .
  3. Clean and inspect the flex plate. Refer to Engine Flywheel Cleaning and Inspection . If the flywheel teeth are damaged, inspect the starter for proper operation. Replace the starter if you find excessive wear or damage to the starter drive.
scientia non olet · About LEMON Manuals