Rear Seat Armrest Replacement (Without AM9)

Fig 1: Rear Seat Armrest (without AM9)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat back. Refer to Rear Seat Back Cushion Removal and Installation (Coupe) . Reposition the rear seat back trim to gain access to the fasteners.
1	Rear Seat Armrest Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 3 N.m (27 lb in)
2	Rear Seat Armrest Bolt (Qty: 4) Tighten 9 N.m (80 lb in)
3	Rear Seat Armrest Procedure Disconnect the rear seat back trim j-channels from to release the armrest.