Rear Seat Back Cushion Removal and Installation (Coupe)

Fig 1: Rear Seat Back

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat cushion. Refer to Rear Seat Cushion Removal and Installation (Coupe) .
1	Rear Seat Back Cushion Nut (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten 30 N.m (22 lb ft)
2	Rear Seat Back Cushion Nut (Qty: 4) Tighten 30 N.m (22 lb ft)
3	Rear Seat Back Cushion Assembly Procedure Remove the rear outboard shoulder belts from the shoulder belt bezel and position it out of the way, if equipped. Pull the seat back cushion forward and upward to remove from the vehicle. Use care when installing the seat back wire harness with the battery cable on the passenger side. It can easily be crushed or nicked if improperly positioned. Note the routing prior to removal in order to ensure a proper reinstallation.