Rear Seat Back Cushion Frame Replacement (without AM9)

Fig 1: Rear Seat Back Cushion Frame (without AM9)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the rear seat back . Refer to Rear Seat Back Cushion Removal and Installation (Coupe) . Reposition the rear seat back trim to gain access to the fasteners.
1	Rear Seat Armrest Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 3 N.m (27 lb in)
2	Rear Seat Armrest Bolt (Qty: 4) Tighten 9 N.m (80 lb in)
3	Rear Seat Armrest
4	Rear Seat Head Restraint Guides (Qty: 4)
5	Rear Seat Back Cushion Frame Procedure Transfer any remaining components as necessary.