Driver Seat Bracket Replacement - Left Side (W2E)

Fig 1: Identifying Driver Seat Bracket - Left Side (W2E)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front seat back cushion cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (W2E) .
1	Driver Seat Bracket Rivet (Qty: 2) WARNING: Use the proper eye protection when drilling to prevent metal chips from causing physical injury. Procedure Drill out both guide rivets before removing.
2	Driver Seat Bracket Procedure The lumbar wires have to be inserted into the guides and then the guides slid into the lower crossmember. Release tension on the wires after the bracket guides locator tabs have been placed in the lower crossmember. Then the guides re-riveted at the bottom of the lower crossmember.

Callout

Component Name

Preliminary Procedure
Remove the front seat back cushion cover and pad. Refer to Front Seat Back Cushion Cover and Cushion Pad Replacement (W2E) .

Driver Seat Bracket Rivet (Qty: 2)

WARNING:

Use the proper eye protection when drilling to prevent metal chips from causing physical injury.

Procedure
Drill out both guide rivets before removing.

Driver Seat Bracket

Procedure

The lumbar wires have to be inserted into the guides and then the guides slid into the lower crossmember.
Release tension on the wires after the bracket guides locator tabs have been placed in the lower crossmember.
Then the guides re-riveted at the bottom of the lower crossmember.