Front Bumper Upper Fascia Replacement

Fig 1: Identifying Front Bumper Upper Fascia

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .
1	Front Bumper Lower Fascia Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Front Bumper Upper Fascia Bolt (Qty: 2) Tighten 10 N.m (89 lb in)
3	Front Bumper Upper Fascia Procedure Carefully push a small nylon wedge between the lower fascia and the upper fascia. Insert a small flat-bladed tool into the fascia slot and depress the tabs one at a time and pull on the fascia at the same time to gradually remove the upper fascia from the fascia. Transfer parts as needed.