Park Pawl and Actuator Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Park Pawl & Actuator Components

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the manual shift shaft position switch. Refer to Manual Shift Shaft Position Switch Replacement . Remove the rear case. Refer to Rear Case and Gasket Replacement (4WD) , Rear Case and Gasket Replacement (2WD) . Remove the park pawl cover. Refer to Park Pawl Cover and Gasket Replacement .
1	Park Pawl Shaft Hole Plug
2	Park Pawl Shaft
3	Park Pawl Actuator Guide Pin
4	Park Pawl
5	Park Pawl Spring
6	Park Pawl Actuator Guide TIP: Push the park pawl into housing in order to remove the park pawl actuator guide.
7	Park Pawl Actuator