LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Instrument Panel Trim And Console Trim >> Repair Instructions >> Front Floor Console Replacement (Cadillac)

Front Floor Console Replacement (Cadillac)

Fig 1: View Of Front Floor Console Assembly & Bolts (Cadillac)
GM1704190Courtesy of GENERAL MOTORS COMPANY
Front Floor Console Replacement (Cadillac)

Callout Component Name

Preliminary Procedures

  1. Remove the 2 front seats. Refer to Front Seat Removal and Installation - Bucket (without HP2) , Front Seat Removal and Installation - Bucket (with HP2) .
  2. Remove the right and left front floor consoleside trim front panels. Refer to Front Floor Console Side Trim Front Panel Replacement - Left Side (Cadillac) , and Front Floor Console Side Trim Front Panel Replacement - Right Side (Cadillac) .
  3. Remove the front floor console bezel. Refer to Floor Console Bezel Replacement (Except Cadillac) , Floor Console Bezel Replacement (Cadillac) .
1 Front Floor Console Assembly Bolt/Screw
CAUTION:

Refer to Fastener Caution .


Tighten 
2 N.m (18 lb in)
2 Front Floor Console Assembly
  1. Disconnect the electrical connectors to the console assembly.
  2. With the aid of an assistant, remove the console from the vehicle.
  3. If replacing the console assembly, transfer all necessary components.