LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2013 >> Escalade Base, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Front End Upper Tie Bar Replacement

Front End Upper Tie Bar Replacement

Fig 1: View Of Upper Tie Bar & Components
GM1772599Courtesy of GENERAL MOTORS COMPANY
Front End Upper Tie Bar Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the radiator grille reinforcement support. Refer to Front Grille Support Replacement .
  2. Remove the radiator support diagonal brace. Refer to Radiator Support Diagonal Brace Replacement .
  3. Remove the upper fan shroud bolts. Refer to Cooling Fan and Shroud Replacement (Non-HP2) , Cooling Fan and Shroud Replacement (HP2) .
  4. Remove the upper radiator bolts. Refer to Radiator Replacement (Non HP2) , Radiator Replacement (HP2) .
  5. Remove the upper condenser bolts. Refer to Air Conditioning Condenser Replacement (Gas) .
1 Upper Tie Bar Bolt (Qty: 6)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Upper Tie Bar Brace Bolt (Qty: 2)
Tighten 
9 N.m (80 lb in)
3 Upper Tie Bar
scientia non olet · About LEMON Manuals