Headlining Trim Panel Replacement (Regular Cab)

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Headlining Trim Panel (Regular Cab)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
WARNING: Do not attempt to repair or alter the head impact energy-absorbing material glued to the headliner or to the garnish trims. If the material is damaged, replace the headliner and/or the garnish trim. Failure to do so could result in personal injury. Preliminary Procedures Disable the SIR system. Refer to SIR Disabling and Enabling . Remove the front assist handle. Refer to Front Assist Handle Replacement . Remove the windshield garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement . Remove the sunshade assemblies. Refer to Sunshade Replacement . Remove the roof console assembly. Refer to Roof Console Replacement . Remove the front door sill plate. Refer to Front Side Door Sill Trim Plate Replacement (Extended Cab) or Front Side Door Sill Trim Plate Replacement (Regular Cab/Crew Cab) . Remove the body lock pillar trim panels. Refer to Body Lock Pillar Trim Replacement (Crew Cab) , Body Lock Pillar Trim Replacement (Extended Cab) or Body Lock Pillar Trim Replacement (Regular Cab) . Remove the front seat headrest.
1	Coat Hook Assembly (Qty: 2) Refer to Coat Hook Replacement .
2	Sunshade Anchor (Qty: 2) Refer to Sunshade Anchor Replacement .
3	Headliner Trim Panel Assembly Procedure Prior to removal, note the routing of the wire harness to aid in reassembly and to ensure proper installation. Disconnect the electrical connector.