Instrument Panel Lower Center Trim Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Instrument Panel Lower Center Trim & Clips

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Fully open the instrument panel compartment when removing the right trim panel.
1	Instrument Panel Lower Center Trim - Right or Left Tip: When removing the left side, also remove the knee bolster. Refer to Knee Bolster Replacement (Cadillac) . Use a flat-bladed plastic trim tool in order to release the trim panel from the instrument panel.
2	Retainer Clips (Qty: 8) (4 per side)