Knee Bolster Replacement (Cadillac)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedures: Remove the park brake release handle. Refer to Parking Brake Release Handle Assembly Replacement . |
|
| 1 | Left Outer Trim Cover Tip: Refer to Instrument Panel Outer Trim Cover Replacement (Cadillac) . |
| 2 | Knee Bolster Assembly Screws (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 2 N.m (18 lb in) |
| 3 | Knee Bolster Assembly |
| 4 | Retainer Clips (Qty: 4) |