LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> STS 3.6 V, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Mechanical - 4.6L (LH2) - Repair Instructions - Off Vehicle - 1 Of 3) >> Exhaust Manifold Removal - Right Side (AWD)

Exhaust Manifold Removal - Right Side (AWD)

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Right Exhaust Manifold Heat Shield & Bolts
    GM1346093Courtesy of GENERAL MOTORS CORP.
  1. Remove the right exhaust manifold heat shield bolts.
  2. Remove the right exhaust manifold heat shield.
  3. Fig 2: Right Exhaust Manifold & Bolts
    GM1346095Courtesy of GENERAL MOTORS CORP.
  4. Remove the right exhaust manifold bolts from the right cylinder head and bell housing.
  5. Remove the right exhaust manifold.
  6. Fig 3: Right Exhaust Manifold Gasket
    GM1346096Courtesy of GENERAL MOTORS CORP.
  7. Remove the right exhaust manifold gasket.
  8. Fig 4: Right Exhaust Manifold Studs
    GM1346105Courtesy of GENERAL MOTORS CORP.
  9. Remove the right exhaust manifold studs from the right cylinder head.
  10. Fig 5: Right Engine Mount - AWD
    GM1346158Courtesy of GENERAL MOTORS CORP.
  11. Remove the right engine mount upper nut.
  12. Remove the right engine mount.
  13. Fig 6: Right Engine Mount Bracket & Bolts - AWD
    GM1346178Courtesy of GENERAL MOTORS CORP.
  14. Remove the right engine mount bracket bolts.
  15. Remove the right engine mount bracket.