LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> STS 3.6 V, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Mechanical - 4.6L (LH2) - Repair Instructions - Off Vehicle - 1 Of 3) >> Engine Flywheel Removal >> Tools Required

Tools Required

WARNING: This page is about a different variant/trim than selected.

EN 46326  Flywheel Holding Tool. See Special Tools .

    Fig 1: Engine Flywheel & Bolts
    GM1346206Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine flywheel bolts.
  2. Remove the engine flywheel.
  3. Fig 2: Flywheel Holder
    GM928040Courtesy of GENERAL MOTORS CORP.
  4. Remove the EN 46326  . See Special Tools .