LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2010 >> DTS V8-4.6L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Drive Belts, Mounts, Brackets and Accessories >> Drive Belt >> Service and Repair >> Water Pump Belt Replacement

Water Pump Belt Replacement




Water Pump Belt Replacement

Removal Procedure

1. Remove the water pump drive belt tensioner. Refer to Drive Belt Tensioner Replacement - Water Pump (Drive Belt Tensioner Replacement - Water Pump).




2. Remove the water pump drive belt (1) by sliding the belt off of the drive pulley (3) and water pump pulley.

Installation Procedure




1. Route the water pump drive belt (1) around the water pump pulley and the water pump drive pulley (3).
2. Install the water pump drive belt tensioner. Refer to Drive Belt Tensioner Replacement - Water Pump (Drive Belt Tensioner Replacement - Water Pump).
3. Check the drive belt for proper seating in all the pulley grooves.

scientia non olet · About LEMON Manuals