Drive Belt Tensioner Replacement - Water Pump

Drive Belt Tensioner Replacement - Water Pump

Removal Procedure




1. Remove the water pump drive belt. Refer to Water Pump Belt Replacement (Water Pump Belt Replacement).
2. Remove the water pump drive belt tensioner studs.
3. Remove the water pump drive belt tensioner.

Installation Procedure




1. Position the water pump drive belt tensioner to the water pump housing.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the water pump drive belt tensioner studs.

Tighten the studs to 10 Nm (89 lb in).

3. Install the water pump drive belt. Refer to Water Pump Belt Replacement (Water Pump Belt Replacement).