Instrument Cluster Replacement (Except Cadillac)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the instrument panel cluster trim plate. Refer to Instrument Cluster Trim Panel Replacement (Except Cadillac) or Instrument Cluster Trim Panel Replacement (Cadillac) . |
|
| 1 | Instrument Panel Cluster Screw (Qty: 4)
CAUTION:
Refer to Fastener Caution
.
Tighten: 2 N.m (18 lb in) |
| 2 | Instrument Panel Cluster Assembly Tip: A replacement cluster must be programmed. Refer to Control Module References . |