Instrument Cluster Replacement (Cadillac)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Instrument Panel Cluster Assembly, Bolts & Screws (Cadillac)

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the instrument panel cluster trim plate bezel. Refer to Instrument Cluster Trim Panel Replacement (Except Cadillac) or Instrument Cluster Trim Panel Replacement (Cadillac) .
1	Instrument Panel Cluster Assembly Bolts/Screw (Qty: 4) CAUTION: Refer to Fastener Caution . Tighten: 2 N.m (18 lb in)
2	Instrument Panel Cluster Assembly Tip: Disconnect electrical connections. A replacement cluster must be programmed. Refer to Control Module References .