Front Floor Console Side Trim Front Panel Replacement - Left Side (Cadillac)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2010 GMC Yukon XL, 2010 GMC Yukon, 2010 Chevrolet Tahoe, 2010 Chevrolet Suburban, and 2010 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the knee bolster assembly. Refer to Knee Bolster Replacement (Cadillac) . |
|
| 1 | Front Floor Console Side Trim Front Panel Procedure: Use a flat bladed plastic trim tool in order to release the retainer clips securing the trim panel to the front floor console assembly. |
| 2 | Retainer Clips (Qty: 4) |