LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2009 >> Escalade EXT >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumper System & Fascia >> Repair Instructions >> Rear Bumper Fascia Replacement (Avalanche, Cadillac EXT)

Rear Bumper Fascia Replacement (Avalanche, Cadillac EXT)

Fig 1: View Of Rear Bumper Fascia & Retainers
GM1755354Courtesy of GENERAL MOTORS CORP.
Callout Component Name

Preliminary Procedures

  1. Remove the rear wheelhouse inner panel extensions. Refer to Rear Wheelhouse Panel Liner Replacement (RPO HP2) or Rear Wheelhouse Panel Liner Replacement (RPO X88 Chevrolet, RPO O88 GMC) .
  2. Remove the side rear bumper step pads. Refer to Rear Bumper Step Outer Pad Replacement (Avalanche, Cadillac EXT) .
  3. Remove the center rear bumper step pad. Refer to Rear Bumper Step Center Pad Replacement (Avalanche, Cadillac EXT) .
1 Rear Fascia Plastic Retainers (Qty: 2)
2 Rear Fascia
IMPORTANT: The spare tire hoist access cover bezel will be destroyed when removing the fascia. The bezel must be replaced.

Tip:  Be sure to disconnect any electrical connectors before attempting the removal of the fascia.