Rear Wheelhouse Panel Liner Replacement (RPO HP2)

Fig 1: View Of Rear Wheelhouse Liner, Screws & Retainers

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure:  Remove the appropriate tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
1	Rear Wheelhouse Panel Liner Screw (Qty: 6) CAUTION: Refer to Fastener Caution . Tighten:  2 N.m (18 lb in)
2	Rear Wheelhouse Panel Liner Plastic Retainer (Qty: 4)
3	Rear Wheelhouse Panel Liner Tip:  Before attempting to remove the wheelhouse liner remove any plastic retainers and/or bolts passing through or attached to the rear wheelhouse panel liner.