LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> XLR Base >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 6L50/6L80/6L90 - Removal & Installation, Service, Overhaul, Troubleshooting & Diagnosis >> Repair Instructions - On Vehicle >> Transmission Fluid Cooler Lower Pipe Assembly Replacement - Auxiliary Cooler to Radiator >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the wheelhouse panel. Refer to Wheelhouse Panel Replacement - Left Side .
    3. Fig 1: View Of Auxiliary TOC Line
    GM1715297Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the radiator to auxiliary transmission oil cooler (TOC) line from the auxiliary TOC. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  4. Remove the radiator to auxiliary TOC line from the auxiliary TOC.
  5. Lower the vehicle.
  6. Remove the upper radiator support. Refer to Radiator Support Replacement .
    7. Fig 2: View Of Radiator To Auxiliary TOC Line From Radiator
    GM1715314Courtesy of GENERAL MOTORS CORP.
  7. Disconnect the radiator to auxiliary TOC line from the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  8. Remove the radiator to auxiliary TOC line from the radiator.
  9. Remove the radiator to auxiliary TOC line from the vehicle.
scientia non olet · About LEMON Manuals