Wheelhouse Panel Replacement - Left Side

Fig 1: View Of Close-Out Panel, Push-In Fasteners & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure:  Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
1	Front Wheelhouse Panel Screw (Qty: 4) NOTE: Refer to Fastener Notice . Tighten:  2.5 N.m (22 lb in)
2	Front Wheelhouse Panel Plastic Retainer (Qty: 5)
3	Front Wheelhouse Panel