Seat Belt Retractor Replacement - No. 2 Rear

Fig 1: View Of Rear Seat Belt Retractor & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove third row seat. Refer to Rear Number 2 Seat Replacement (Tahoe/Yukon/Escalade) or Rear Number 2 Seat Replacement (Suburban/Yukon XL) . Remove third row seat hinge finish cover. Refer to Rear Seat Number 2 Hinge Finish Cover Replacement . Remove third row seat back pad and cover. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement .
1	Rear Seat No. 2 Belt Bolt NOTE: Refer to Fastener Notice . Tighten: 52 N.m (38 lb ft)
2	Rear Seat No. 2 Belt Bracket Screw (Qty: 2) Tighten: 2 N.m (18 in)
3	Rear Seat No. 2 Belt Bracket Assembly
4	Rear Seat No. 2 Belt Bolt Tighten: 52 N.m (38 lb ft)
5	Rear Seat No. 2 Belt Assembly