Rear Seat Number 2 Hinge Finish Cover Replacement

Fig 1: View Of Rear Seat Hinge Finish Cover & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure:  Remove the Rear Seat No. 2 Back Cushion Cover. Refer to Rear Seat Number 2 Back Cushion Cover and Pad Replacement .
1	Rear Seat Hinge Finish Cover Screw (Qty: 2) NOTE: Refer to Fastener Notice . Tighten:  2 N.m (18 lb in)
2	Rear Seat Hinge Finish Cover Tip:  Slide the belt out through the slit in the back of the bezel.