LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2008 >> Escalade RWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim And Upholstery >> Repair Instructions >> Rear Seat Armrest Replacement (Tahoe/Yukon/Escalade with Split Bench)

Rear Seat Armrest Replacement (Tahoe/Yukon/Escalade with Split Bench)

Fig 1: View Of Rear Seat Armrest & Bolts
GM1685301Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the seat back cushion cover and pad. Refer to Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Bucket)  or Rear Seat Back Cushion Cover and Pad Replacement (Tahoe/Yukon/Escalade with Split Bench)  or Rear Seat Back Cushion Cover and Pad Replacement (Avalanche/Escalade EXT) .
1 Rear Armrest Bolt (Qty: 2)
NOTE: Refer to Fastener Notice .

Tighten:  9 N.m (80 lb in)
2 Rear Seat Armrest
scientia non olet · About LEMON Manuals