Transmission Converter Cover Replacement
Transmission Converter Cover Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Raise the vehicle. Refer to Lifting and Jacking the Vehicle . |
|
| 1 | Torque Converter Cover Bolt
NOTE:
Refer to Fastener Notice
.
Tighten: 10 N.m (89 lb in) |
| 2 | Torque Converter Cover Tip: Remove the starter. Refer to Starter Motor Replacement . |
| 3 | Torque Converter Cover Bolt Tighten: 10 N.m (89 lb in) |
| 4 | Torque Converter Cover |