LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2007 >> Escalade RWD >> Repair and Diagnosis >> Transmission >> Hydraulic Diagrams >> Automatic Transmission - 6L50/6L80/6L90 - Introduction (2 Of 2) >> Repair Instructions >> Repair Instructions - Off Vehicle >> Control Valve Body Assembly Assemble >> Valve Body, Control Solenoid Torque Sequence

Valve Body, Control Solenoid Torque Sequence

Fig 1: Control Solenoid Torque Sequence & Bolts
GM1627747Courtesy of GENERAL MOTORS CORP.
Valve Body, Control Solenoid Torque Sequence

Callout Component Name
NOTE: Bolt torque sequencing is critical to the proper function of the control solenoid valve assembly. Failure to follow the required sequencing may result in transmission malfunction.
NOTE: Refer to Fastener Notice .
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .Tip: 
  1. Hand tighten the last 6 bolts before final torque sequence.
  2. The 2 "heat sink" bolts must be tightened last.
1 Bolts M5 x 45 (Quantity: 5)
2 Bolt M5 x 55

Tighten:  Tighten all 18 bolts in the sequence shown to 8 N.m (71 lb in).
scientia non olet · About LEMON Manuals