Upper to Lower Control Valve Body Assemblies Assemble
Upper to Lower Control Valve Body Assemblies Assemble
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Fastener Notice
. Refer to Fastener Tightening Specifications . |
|
| 1 | Control Valve Body Ball Check Valve (Quantity: 7) Tip: Refer to Ball Check Valve Locations . |
| 2 | Control Valve Body Spacer (w/Gasket) Plate Assembly
NOTE:
Do not use the old spacer plate. Install a NEW spacer plate. Reusing an old spacer plate may cause internal transmission leaks and transmission damage.
|
| 3 | Control Valve Lower Body Assembly Tip: Turn the valve body assembly over after installing to upper body. |
| 4 | Bolt M5 x 36 (Quantity: 12) Tighten: Tighten the bolts in the sequence shown to 8 N.m (71 lb in). |