Input and Output Speed Sensor Assembly Installation

Fig 1: View Of Input & Output Speed Sensor Assembly & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Refer to Fastener Tightening Specifications .
1	A/Trans Input and Output Speed Sensor Wiring Harness Clip (Quantity: 2) Tip: Inspect the 2 wiring harness clips for damage. Replace if damaged.
2	A/Trans Input and Output Speed Sensor Assembly
3	Bolt M6 x 20 (Quantity: 2) Tighten: Tighten bolts to 12 N.m (106 lb in).