Driver Information Center (DIC) Switch(es) Inoperative
Driver Information Center (DIC) Switch(es) Inoperative
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| Schematic Reference: Instrument Cluster Schematics Connector End View Reference: Instrument Panel, Gages, and Console Connector End Views |
||||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | - | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 | Inspect for poor connections at the driver information center (DIC) switches. Refer to Testing for Intermittent Conditions and Poor Connections
and to Connector Repairs
. Did you find and correct the condition? |
- | Go to Step 4 | Go to Step 3 |
| 3 | Replace the instrument panel cluster (IPC). Refer to Control Module References
for replacement, setup, and programming. Did you complete the replacement? |
- | Go to Step 4 | - |
| 4 | Operate the system in order to verify the repair. Did you correct the condition? |
- | System OK | Go to Step 2 |