Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Ignition ON, command the CAC Coolant Pump ON and OFF with a scan tool. Listen for the CAC coolant pump to turn ON and OFF with each command.
- Verify that the charge air cooler (CAC) coolant level is full. Refer to Cooling System Leak Testing (Powertrain) or Cooling System Leak Testing (Charge Air Cooling) , Charge Air Cooling System Coolant Level Inspection , and Charge Air Cooling System Draining and Filling (Static Fill) or Charge Air Cooling System Draining and Filling (Vac N Fill) .