LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2005 >> STS 3.6 7 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Engine Mechanical - 4.6L (LH2) (5 Of 6)) >> Off-Vehicle Repair Instructions - Part 3 >> Oil Outlet Tube Installation

Oil Outlet Tube Installation

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Oil Outlet Tube O-Ring
    GM928363Courtesy of GENERAL MOTORS CORP.
  1. Install a NEW O-ring on the oil outlet tube.
  2. Apply lubricant to the O-ring.
  3. Fig 2: View Of Oil Outlet Tube Bolts
    GM928361Courtesy of GENERAL MOTORS CORP.
  4. Install the oil outlet tube.
  5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  6. Install the oil outlet tube bolts (1-5).

    Tighten:  Tighten the oil outlet tube bolts to 10 N.m (89 lb in).